Dr+lab Solution
DR+LAB solutions are targeted, high-concentration treatment formulas designed to address specific skin concerns with precision. From the pH-correcting Propolis Solution to the barrier-repairing Centellasica Solution and the hyaluronic acid-dense Hydra-15 Solution, each product delivers a concentrated dose of active ingredients in a lightweight format that layers cleanly under your moisturiser. This collection brings together DR+LAB's most clinically focused single-task products.
By Skinsli editorial Updated
You've reached the end
Buying guide
DR+LAB Solutions: Targeted Treatment Formulas Explained
DR+LAB's solution-format products share a common philosophy: deliver a high concentration of one or two key actives in a texture thin enough to layer at the beginning of your routine, before moisturisers and SPF. This guide walks through each product in the collection, explains the active ingredient logic, and shows you how to incorporate them without overloading your skin.
Hydra Derma Centellasica Solution
The Centellasica Solution (50 g) combines centella asiatica triterpenoids with the broader Hydra Derma barrier-repair formula. Centella's madecassoside and asiaticoside accelerate keratinocyte migration and collagen crosslinking, shortening the skin's recovery time after damage. The gel-cream texture absorbs quickly and layers well under the Centellasica Cream for a full barrier-repair treatment. Use after cleansing and toning on days when skin feels compromised, tight, or reactive.
P.H. Balancing Propolis Solution
Propolis is a bee-derived resin with documented antibacterial and anti-inflammatory properties at skin-relevant concentrations. The P.H. Balancing Propolis Solution (30 ml) adds propolis to DR+LAB's pH-correction base, making it a dual-action first step: it restores the acid mantle after cleansing and delivers a light antimicrobial shield that is particularly helpful for acne-prone or breakout-prone skin. Apply after cleansing and before serums.
Hydra-15 Hyaluronic Acid Solution
The Hydra-15 Hyaluronic Acid Solution (30 ml) is a concentrated hyaluronic acid shot in a very lightweight serum format. It layers between toner and any heavier treatment, pulling moisture into the epidermis to create a hydrated base for actives applied on top. The 30 ml size makes it suitable for travel or for pairing with a different brand's daily moisturiser when you want targeted hydration without committing to a full DR+LAB routine.
P.H. Balancing Ampoule
The 500 ml P.H. Balancing Ampoule is the clinic-scale counterpart to the Propolis Solution, without the propolis. It focuses solely on rapid acid-mantle restoration after cleansing. For daily use by anyone who cleanses morning and evening, the large format means the product lasts 6-9 months, giving excellent cost-per-use value. Apply with hands or a cotton pad immediately after cleansing, before any other treatment step.
White Factor Brightening Solutions
DR+LAB's White Factor Cream (60 ml) and White Factor Deep Cream (200 ml) target hyperpigmentation with a combination of skin-brightening actives. The Deep Cream in particular suits post-inflammatory hyperpigmentation (PIH) from acne scarring or sun damage. While not branded as a "solution," both products function as targeted treatments in the collection and pair well with the Hydra-15 Solution as a hydration base layer before application.
Sulphur Powder Wash
Sulphur is one of the oldest dermatologically validated ingredients for sebum control and mild exfoliation. The DR+LAB Sulphur Powder Wash (60 g) is a targeted solution for acne-prone or oily skin that needs a keratolytic (cell-softening) cleanse. Used 2-3 times per week in place of your regular cleanser, it clears congestion without the over-drying effect of benzoyl peroxide. Follow with the P.H. Balancing Ampoule to restore the acid mantle after this more alkaline wash formula.
How to Layer DR+LAB Solution Products
Apply DR+LAB solutions from thinnest to thickest texture, always after cleansing and pH correction. A typical multi-solution sequence might look like: Propolis or P.H. Ampoule (pH step) - Hydra-15 HA Solution (hydration base) - Centellasica Solution (if targeting barrier repair) - treatment cream or moisturiser. Avoid using three or more active solutions in the same routine step; instead, alternate between morning and evening or between weekday and weekend routines to prevent ingredient fatigue.
Daily UV Protection in the Collection
The Non-Chemical Sun Fluid (65 ml) rounds out the DR+LAB solution collection with a mineral-filter sunscreen that avoids the common chemical UV absorbers (octinoxate, oxybenzone) that can irritate reactive skin. Its fluid texture layers cleanly over solutions and serums. It is the preferred finishing step for this collection, particularly for skin using the active treatments (centella, propolis, HA) that benefit from UV protection to prevent free-radical damage reversing their effects.
FAQ
Frequently asked questions
FAQ
Frequently asked questions
What does the DR+LAB Hydra Derma Centellasica Solution do?
The Centellasica Solution delivers a concentrated dose of centella asiatica triterpenoids (madecassoside, asiaticoside) directly to the epidermis. These compounds speed up barrier repair, reduce redness, and support collagen crosslinking. The solution format allows it to absorb fully before your moisturiser seals the active layer in, making it more effective than a centella cream applied alone.
What does propolis do in a skincare product?
Propolis is a resinous compound bees produce to seal and protect the hive. In skincare, its flavonoids and phenolic acids provide antimicrobial activity against acne-causing bacteria, anti-inflammatory action that reduces redness and swelling, and mild antioxidant protection. DR+LAB incorporates it into the P.H. Balancing Propolis Solution so it works at the first active step in the routine, before other treatments are applied.
When should I use the Hydra-15 Hyaluronic Acid Solution versus a regular HA serum?
The Hydra-15 Solution is best used as a base layer before heavier actives (vitamin C, peptides, centella) when you want to pre-hydrate the skin and improve absorption of subsequent steps. A regular HA serum often comes in a slightly thicker vehicle and is applied later in the routine. The Hydra-15 Solution's very lightweight texture makes it appropriate as the first treatment step immediately after toning.
How often should I use the DR+LAB Sulphur Powder Wash?
Start with 2 times per week and assess how your skin responds. Sulphur is keratolytic and can be drying if overused. If you have oily or acne-prone skin with no dryness concerns, 3 times per week is generally well-tolerated. Always follow with a pH-balancing step (P.H. Ampoule) and moisturiser after a sulphur cleanse. Avoid using on the same evenings as retinoids or strong AHAs to prevent over-exfoliation.
What makes the DR+LAB Non-Chemical Sun Fluid different from standard sunscreens?
The Non-Chemical Sun Fluid uses mineral UV filters (titanium dioxide and/or zinc oxide) rather than chemical absorbers. Mineral filters sit on the skin surface and physically scatter UV radiation rather than absorbing and converting it to heat. This makes them inherently non-irritating and immediately effective from the moment of application, with no required 15-20 minute absorption wait. The fluid formulation keeps the texture lightweight so it does not feel heavy over solution-based routines.
Will the DR+LAB White Factor products fade dark spots?
The White Factor Cream and Deep Cream target hyperpigmentation with brightening actives that inhibit melanin transfer at the skin surface. Consistent use over 8-12 weeks typically lightens post-inflammatory hyperpigmentation (PIH) from acne marks and mild UV-induced dark spots. For deeper melasma, a combination of the White Factor range with SPF protection (the Non-Chemical Sun Fluid) and a vitamin C treatment will produce better results than any single product alone.
In what order do I layer DR+LAB solution products?
Thinnest to thickest is the reliable rule. A full multi-product sequence: cleanse (Sulphur Wash or Activezyme) - pH ampoule (Propolis or plain P.H. Ampoule) - Hydra-15 HA Solution - Centellasica Solution (if using) - White Factor treatment - moisturiser or cream - SPF (Non-Chemical Sun Fluid). In the evening, skip SPF and optionally add the Centellasica Mask or Collagen Modeling Mask after the solutions before your cream.
Which DR+LAB solutions are best for acne-prone skin?
The Sulphur Powder Wash clears congestion and controls sebum. The P.H. Balancing Propolis Solution follows with light antimicrobial protection. The Centellasica Solution addresses post-breakout redness and barrier repair. For daytime, the Non-Chemical Sun Fluid is the best SPF choice as it does not contain comedogenic chemical filters. This combination covers the key acne-care pillars: cleansing, control, calming, and UV protection.
How do I store and use the 500 ml P.H. Balancing Ampoule without it going bad?
Store in a cool, dark location away from direct sunlight. The large dispenser bottle keeps air exposure minimal compared to an open jar. Once opened, the product is typically stable for 12 months when stored properly. If you apply it with a cotton pad, use clean pads each time and avoid dipping used pads back into the bottle. Alternatively, decant a week's worth into a smaller travel-size bottle for daily convenience.
Can I use DR+LAB solutions if I have rosacea?
Several DR+LAB solutions are well-suited to rosacea-prone skin. The Centellasica Solution directly targets redness and barrier disruption. The Non-Chemical Sun Fluid avoids chemical filters that can trigger flushing. Avoid the Sulphur Powder Wash on active rosacea flares as it can be temporarily drying. The P.H. Propolis Solution is generally compatible but patch-test first as some rosacea skin is sensitive to propolis. Start with the gentlest products and introduce others one at a time.
Where does the DR+LAB All-in-One Renewal Pack fit in a solution-based routine?
The All-in-One Renewal Pack is a multi-step consolidator that replaces toner, essence, and moisturiser when you want a simplified routine. In the context of this solution collection, it works best on days when you are not layering multiple solutions: apply after cleansing and pH correction in place of individual solution steps. On your full treatment days, use the individual solutions and follow with the Biopepta Revitalizing Cream instead.