Dammall Raw

Dammall Raw supplies cosmetic-grade raw actives for DIY skincare formulators and advanced home users who want to add specific ingredients to existing products or build their own serums. The 11+ Raw products on skinsli include Matrixyl 3000 liquid (a patented peptide complex for anti-ageing), Broccoli Extract (antioxidant sulforaphane source), Zimo Extract with borphyrin (a Korean-developed ingredient for melanin suppression), and pharmaceutical-grade 1% Polymer Hyaluronic Acid. Sizes run from 30ml to 1 litre, covering both trial quantities and bulk formulation use. These are undiluted or lightly diluted raw ingredients rather than finished skincare products.

  • Cosmetic-grade raw actives
  • DIY formulation
  • Matrixyl 3000 peptide
  • Hyaluronic acid 1% pure

By Skinsli editorial Updated

Buying guide

Dammall Raw Actives: What Each Ingredient Is, How to Use It, and Which Format to Choose

Dammall Raw sells cosmetic-grade raw actives in liquid form - the type of ingredients used by professional formulators to build skincare products from scratch, or by experienced home users who add actives directly to existing serums, moisturisers, or toners. These are not finished skincare products: they require dilution into a base or carrier before application. Knowing what each ingredient does and at what concentration it should be used is essential before purchase.

What raw liquids are and who they are for

Raw cosmetic liquids are concentrated active ingredient solutions - sometimes pure, sometimes at a working concentration in water or a carrier solvent. They are used in two main ways: added in small amounts to finished products (layering technique) or incorporated into DIY formulations from scratch. The dammall Raw line is suited to people who already understand ingredient concentrations and skin compatibility, not for beginners who want a ready-to-use product. All products should be patch-tested before use and should be handled with clean equipment to avoid contamination.

Matrixyl 3000 Raw Liquid (30ml): patented peptide complex

Matrixyl 3000 (INCI: Glycerin, Water, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7) is a patented peptide complex developed by Sederma. It is one of the most clinically studied cosmetic peptide blends for collagen-stimulation and wrinkle reduction. The dammall version is a 30ml raw liquid for formulation use. Typical effective use concentration in finished products is 2-8%. Adding 2ml to a 100ml serum or moisturiser gives approximately 2% active, which is within the studied range.

Store in a cool, dark place and use within 12 months of opening.

Broccoli Raw Liquid / Broccoli Extract Raw Solution: antioxidant plant active

Broccoli extract is a source of sulforaphane and glucosinolates - antioxidant and anti-inflammatory compounds that have been studied for skin protection against UV-induced oxidative stress and photoageing. The dammall Broccoli Raw Liquid (500ml) and Broccoli Extract Raw Solution (300ml, available as 1+1 set) are for addition to existing serums or moisturisers to boost antioxidant protection. Typical addition rates are 1-5% in a finished formula.

Zimo Extract Raw Solution with Borphyrin: Korean brightening active

Zimo Extract with borphyrin is a Korean cosmetic ingredient developed for melanin suppression (reducing dark spots and uneven tone). Borphyrin is listed on INCI as a synthetic peptide derivative. The Zimo Extract is available in the dammall line in 50ml, 100ml, 300ml, 500ml, and 1L sizes - the wide size range reflects its use both as a skincare add-in and as a professional formulation ingredient. Targeted brightening active; use at formulator-recommended concentrations as per the product data sheet.

Polymer Hyaluronic Acid 1% Raw Solution: ready-to-add humectant

The Polymer Hyaluronic Acid 1% Raw Solution is hyaluronic acid pre-dissolved at 1% concentration in water - a standard working concentration used directly in formulations or as an add-in to boost the HA content of an existing toner or serum. Available in 100ml and 1000ml sizes. At 1% concentration, it can be added at 10-30% to a finished product (giving 0.1-0.3% HA in the final formula, which is within typical cosmetic HA ranges). The 1L size is value-sized for formulators making multiple batches.

How to add raw actives to existing products

The layering approach is simpler than full formulation: add a small amount (1-5ml per 100ml of finished product, depending on the active) to a toner, serum, or moisturiser and mix thoroughly. Use a clean dropper or pipette. Do not mix actives that are incompatible (e.g. vitamin C and niacinamide at high concentrations, or retinol and AHAs). Always patch-test the modified product before full-face use. Keep the modified product refrigerated and use within 2-4 weeks, as adding water-based actives to finished products shortens preservation life.

Choosing the right size

For initial trials: the 30ml Matrixyl and the 50-100ml Zimo and HA sizes are sensible starting quantities. For regular home formulation: 300ml sizes give several months of use without excessive restocking. The 1L HA and 500ml Broccoli/Zimo formats are for semi-professional or batch formulation contexts where larger quantities are needed. Store all sizes in a cool environment and mark opening dates on labels.

FAQ

Frequently asked questions

  • Not as a general rule. The 1% Hyaluronic Acid solution can be applied directly in small amounts as a hydrating serum, since 1% HA in water is already at a finished-product concentration. The Matrixyl 3000, Broccoli Extract, and Zimo Extract are meant to be added to a base or finished product at recommended rates (typically 2-10%) rather than used neat. Applying concentrated actives directly without dilution can cause irritation or allergic reactions. Always check the product data sheet and do a patch test.

  • The typical effective use concentration for Matrixyl 3000 in finished formulas is 2-8%. For home use, starting at 2% (2ml Matrixyl per 100ml of finished product) is recommended before increasing. The clinical studies behind Matrixyl 3000's efficacy used concentrations of 3-5%. Add it to your serum or moisturiser using a clean dropper, mix thoroughly, and store in a clean airtight container. Use the modified product within 2-4 weeks.

  • Borphyrin is a synthetic peptide derivative used in Korean cosmetics primarily as a melanin-production inhibitor - it targets the tyrosinase enzyme involved in pigment synthesis. The Zimo Extract with borphyrin is positioned as a brightening active for addressing hyperpigmentation, dark spots, and uneven skin tone. It is a relatively new ingredient in the K-beauty formulation toolkit and is used in the same role as more established brightening actives like arbutin or niacinamide, but with a different mechanism.

  • Broccoli extract contains sulforaphane, which has been studied in dermatology literature for its ability to activate the Nrf2 antioxidant pathway in skin cells - a different mechanism from topical antioxidants like vitamin C that work directly on free radicals. Research suggests it may provide photoprotective and anti-inflammatory effects when incorporated into skin care. It is most effective as part of a multi-antioxidant approach rather than a single-ingredient antioxidant strategy.

  • 1% HA is a typical finished-product concentration - most commercial HA serums contain 0.1-2% HA. The dammall 1% solution can be used directly as a lightweight hydrating serum (apply to damp skin, follow with moisturiser) or added to another product. Adding 20ml of the 1% HA solution to an 80ml finished serum gives an end concentration of 0.2% HA in the blend, which is within normal commercial range. The 1% as supplied is usable neat for some users but adding it into existing products at 20-30% is also an option.

  • These products are best suited for people who already have an understanding of cosmetic ingredient safety, concentration ranges, and formulation basics. Beginners who want the benefits of Matrixyl, hyaluronic acid, or broccoli extract should start with finished products that contain these ingredients. The dammall Raw line is for DIY formulators, advanced home users, or professionals who specifically want to control exact ingredient concentrations in their products.

  • Store all raw actives in a cool, dark location - ideally a refrigerator for peptide products like Matrixyl 3000. The Hyaluronic Acid solution should also be refrigerated after opening to extend its microbial stability. The Broccoli and Zimo extracts should be kept away from heat and light. Typical shelf life unopened is 12-24 months; after opening, use within 6-12 months and mark the opening date on the bottle. Bulk sizes (1L) should be decanted into smaller work bottles to minimize contamination of the main container.

  • At minimum: clean glass or HDPE plastic containers, a clean dropper or pipette, a small digital scale, and a clean mixing tool (glass rod or spatula). For stability, the pH of the final formula matters for some actives - Matrixyl 3000 works best at pH 5-7, which is close to most commercial serums. Avoid using metal utensils with peptide solutions. If you are mixing into a purchased product rather than formulating from scratch, no special equipment is needed beyond a clean dropper and a container for the modified product.

  • Yes. Matrixyl 3000 and hyaluronic acid are compatible and commonly used together in professional serums. HA provides hydration and helps carry the peptide complex into the skin surface, while Matrixyl works on collagen-stimulation deeper in the dermis. A simple combination: add 2-3% Matrixyl 3000 and 20-30% of the 1% HA solution to a simple aqueous base (water, panthenol, glycerin). This is a functional anti-ageing hydrating serum within the ingredient ranges used in commercial products.

  • Dammall is a Korean brand and all Raw actives are produced in South Korea to Korean cosmetic ingredient standards. Skinsli sources them directly from Korean channels. Products are shipped to US addresses with standard tracking. As raw cosmetic ingredients, they arrive in functional packaging without the extensive English labeling of finished skincare products - ingredient names are typically in INCI format on the label.